Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Enterprise, NV
If your gate won’t open, won’t latch, or needs a whole new operator, we’re the gate company in Enterprise, NV that works on gates and nothing else. Gate installation is the call we get most here: block-wall perimeter gates for the gated enclaves, wrought-iron driveway gates, and pool-enclosure gates that all have to look a certain way to stay on the right side of the community’s CC&Rs. Enterprise is HOA-heavy, desert-hot, and full of 1990s to 2010s stucco-and-tile homes, and that combination shapes every job we do. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and give free estimates. Call (844) 420-8518.
Why Enterprise Homes Are Different
The first thing that changes the work in Enterprise is the HOA. Much of this southwest valley suburb was master-planned, and a large share of the gates here are community perimeter, pool-enclosure, or driveway gates governed by CC&Rs. Replacing a gate or an operator with hardware, finish, or color the community board didn’t approve can trigger a violation notice, so before anyone orders parts we check the approved gate style. That’s a real step, and it’s the way gate work goes in Enterprise.
The second factor is the climate. Extreme desert heat and intense UV bake operators, control boards, and plastic components faster here than most homeowners expect. Blowing dust works its way into hinges and tracks, and caliche-laden soil heaves posts and loosens mounts. When rare monsoon or winter wind storms roll through, we see a spike in bent gates and failed openers. Housing stock matters too: block-wall and wrought-iron or ornamental steel gates dominate, and some newer construction in the area is still under builder or HOA warranty, which we factor in before any repair.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Enterprise Services
For most Enterprise properties, the two calls that come in fastest are a gate that has failed and an operator that has quit moving the gate at all. Here’s what each one involves locally.
Gate Repair in Enterprise
Manual or hard-to-move gates in Enterprise break in predictable ways: hinges worn from dust, tracks pushed out of line by soil movement, latches that no longer meet after a wall settles. Our technicians have up to 11 years of experience and work on the gate itself, whether it’s ornamental steel, wrought iron, or block-wall framing. Because so many Enterprise gates sit on HOA-governed common areas, we check the shared boundary and the approved finish so a repair doesn’t turn into an architectural review problem. Call (844) 420-8518. We answer 24/7. For the full breakdown of how we handle a fixed gate, see our Gate Repair in Enterprise page.
Electric Gate Repair in Enterprise
When a gate has a motor and it stops responding, the cause is usually electrical: a weathered control board, a component cooked by summer heat, or limit and safety sensors knocked out of alignment. We diagnose motorized and access-control systems rather than just manual hardware, and we’re fluent in brands like Linear and Viking. In Enterprise, HOA-approved hardware matters, and replacing a failed board or operator with an unapproved model is a headache you don’t want. Call (844) 420-8518 and we’ll take a look. More detail lives on our Electric Gate Repair in Enterprise page.
Gate Installation in Enterprise
Gate installation in Enterprise starts with the community, not the catalog. Because so much of this suburb is master-planned and HOA-governed, a new gate or operator has to match the approved style, finish, and sightlines before a single part is ordered. Combine that with extreme heat and UV that shorten the life of plastic and electronic components, plus blowing dust and caliche soil that chew at posts and hinges, and the installation has to be built for a hard environment. If you want our full breakdown of gate installation, that page covers the whole scope. We’re fluent in BFT, Linear, Viking, and Ghost Controls, so we can match a drive to the existing hardware.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open a driveway gate by hand, or the operator on an existing gate is at the end of its life and no longer worth repairing.
What it costs in Enterprise
An automatic gate operator installation typically runs $2,500 to $6,500 in Enterprise, depending on the gate weight, the operator, and whether a power run has to be added.
How we do it
We measure the gate and the run of travel first, confirm the community’s approved hardware, then set the operator, wire the controls and safety edges, and test the full open-close cycle.
Sliding Gate Installation
Signs you need it
A swinging gate doesn’t fit the driveway’s grade or clearance, or a slide is the only layout a narrow or sloped Enterprise driveway will accept.
What it costs in Enterprise
Sliding gate installation typically falls in the $3,000 to $7,000 range in Enterprise, driven by gate width, panel material, and whether the track and posts need new footings.
How we do it
We lay out the track, set the posts to proper footing depth in the caliche-heavy soil, mount the gate and rollers, then add the operator and safety edges if it’s motorized.
What Gate Installation Costs in Enterprise
These are typical, estimated ranges. Prices here run higher when HOA-approved custom finishes, ornamental steel, or a new electrical run are part of the job.
| Item | Typical range in Enterprise |
|---|---|
| Driveway gate installation | $1,500 – $6,000 |
| Automatic gate operator installation | $2,500 – $6,500 |
| Sliding gate installation | $3,000 – $7,000 |
| Electric gate installation | $2,800 – $7,000 |
| Standard manual gate installation | $1,000 – $3,500 |
| Safety edge and sensor package | $250 – $900 |
| Power run and controls wiring | $400 – $1,800 |
| Post replacement and footing reset | $300 – $1,500 |
| Operator replacement (labor and unit) | $1,500 – $4,000 |
Do you handle the power run and the safety edges on a new gate?
Yes. We run the power and controls wiring and install the safety edges and sensors as part of a new automated gate, so the system meets code and stops for obstructions. Call (844) 420-8518 for a free estimate on the full scope.
Will an HOA-approved gate take longer to install in Enterprise?
Sometimes, because the approved style, color, and hardware have to be confirmed before we order. That review step is why installations here are measured and scheduled rather than rushed. Call (844) 420-8518 to start the process.
Brands We Service in Enterprise
We work on your brand, not just whatever’s easy to source. Our technicians are fluent in LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering everything from a residential driveway operator to a heavy commercial entry. We don’t stock parts locally, so turnaround depends on the part and the brand. Browse our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Enterprise, NV
Every figure below is a typical, estimated range. In Enterprise, HOA-approved custom hardware and finishes push the number up, and the price is quoted and agreed before any work starts, so it’s the written estimate that sets the final price.
| Service | Typical range in Enterprise |
|---|---|
| Driveway gate installation | $1,500 – $6,000 |
| Automatic gate operator installation | $2,500 – $6,500 |
| Sliding gate installation | $3,000 – $7,000 |
| Electric gate installation | $2,800 – $7,000 |
| Standard manual gate installation | $1,000 – $3,500 |
| Safety edge and sensor package | $250 – $900 |
| Power run and controls wiring | $400 – $1,800 |
| Post replacement and footing reset | $300 – $1,500 |
| Operator replacement (labor and unit) | $1,500 – $4,000 |
The two things that push price most in Enterprise are HOA-approved custom finishes and the electrical work to power a new operator. We quote it upfront before any work begins.
Neighborhoods We Serve in Enterprise
We cover the gated enclaves off the 215 and Blue Diamond corridor along with the surrounding subdivisions, and response times across Enterprise are consistent wherever the gate sits. Because so many of these gates are shared community assets, expect a quick read on whether the work needs HOA sign-off.
- The gated communities off Blue Diamond
- Enclaves along the 215 corridor
- Southwest Enterprise subdivisions
- Newer construction under builder or HOA warranty
- Residential pool-enclosure and driveway gates
Service Area – Cities Near Enterprise
Enterprise sits in the southwest Las Vegas Valley, and we also cover the communities around it. If you’re just outside Enterprise, we can come to you from our nearby service area: Spring Valley, NV, Paradise, NV, Henderson, NV, and Las Vegas, NV. We’re gate specialists, not generalists, so wherever your gate is, it’s still our lane.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Enterprise
Yes. We cover gated enclaves off the 215 and Blue Diamond corridor as well as the surrounding subdivisions, and response across Enterprise is consistent. Call (844) 420-8518. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Often, yes. Because Enterprise is HOA-heavy, we check the community’s approved gate style and color before ordering, and you should ask the city about any permit the work requires. Call (844) 420-8518 to talk it through.
For repair calls, same-day service is often possible, so call (844) 420-8518. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Ready to fix, automate, or install a gate at your Enterprise property? Call (844) 420-8518 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 11 years of experience, we’re fluent in the brands your gate runs on, and the price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Enterprise Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Eric Chen"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Kristen Padgett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Elena Delgado